About Receiver: Model No.: AK-C211008. 1. Working voltage: DC12V-36V. 2. Quiescent condition: Less than 6mA. 3. Working temperature: -40 Degree +80 Degree About Learning and clearing Method: Learning: Press learning button, the indicator flashes and OFF, loosen finger, press any button of the remote transmitter, indicator flashes three times, meaning learning succeeds.(how many times press the learning button according to the working way you need) Clearning: Hold press learning button about 8 seconds,indicator light flashes several times and off, then press remote ,Relay did not Respond ,it means clearning code successful. Receiver sensitivity: more than -105dBm Working frequency: 433mhz Output voltage: DC and AC is optional Max load current: 10A About Working way: Working way changed by Learning button Momentary: Press the Learning Button 1 times. Relay: Press and hold - On; Release - Off. Toggle: Press the Learning Button 2 times. Relay: Press - On; Press same button again - Off Latched: Press the Learning Button 3 times. Relay: Press - On; Press other button - Off. 2channel Momentary +2channel Latched: Press the Learning Button 4 times. 2channel Momentary +2channel Toggle: Press the Learning Button 5 times. 2channel Toggle +2channel Latched: Press the Learning Button 6 times. About Remote Control Transmitter: 1.Buttons: 4 Buttons 2.Working Voltage: AA x 2 battery, batterynot included 3.Operating frequency:433MHz 4.Remote Distance: 200-1000M 5.Operating Current: 13 mAh 6.Encode: EV1527 code Color: white+orange Material: ABS Due to different product batches, the appearance may be different, which does not affect use. Package Contents: 1 x receiver 1 x Remote Control Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.