Double power automatic transfer switch Generator 4P rail mounted changeover switch 100A AC110V 1. 2 working modes: double power automatic transfer switch can be operated automatically or manually, millisecond switching is uninterrupted, the structure is compact, the transmission is reliable , installation and maintenance are convenient, and the service life is long. 2. Continuous power supply: When the normal power supply is abnormal, the emergency power supply works immediately to ensure the continuity, reliability and safety of the power supply. 3. Rail Mounted: This automatic transfer switch is suitable for emergency power supply systems rated at 110V 100A at 50 or 60Hz AC, which is specially designed for domestic railway installations and is specially designed for PZ30 distribution boxes. 4. Wide Application: This automatic transfer switch is used in various occasions where continuous power outages are not allowed, such as homes, shopping malls, factories, laboratories, farms, etc. 5. Reliable material: The changeover switch is made of excellent flame retardant PC material, with excellent insulation, high temperature resistance, silver anti-aging, safe and reliable. Specification:Item type: double power automatic transfer switch Material: PC and silver Model: NLQ3 125 4P Rated current le: 100A Insulation voltage Ui: AC690V Rated voltage Ue: AC110V Frequency: 50 or 60Hz Rated control voltage US: 110VAC 85 % us 110% Level: PC level Specification: 4P Lifespan: Electrical: 2000 times Mechanical: 5000 times Rated short circuit current: 50kA Fuse: RT16 00 63A Rated impulse withstand voltage: 8kV Auxiliary circuit: 2 relays, each with two sets contact capacity: AC110V50HZ le=5y Touch time: operation conversion time: return time: closing time: How to use: 1. Please check the integrity of the ATS before installation, open or close the ATS with the operating handle, check the drive flexibility and test the generation and disconnection conditions each load stage for normal and standby power. 2. Use wiring according to the point of sale diagram. Package list: 1 x double power automatic transfer switch Note: 1. The maximum ambient temperature should not exceed 40 deg; C, the minimum should not be lower than -5 deg; C, and the average temperature during 24 hours should not be higher than 35 degrees Celsius; C. 2. The altitude of the installation site should not be higher than 2000m. 3. When the maximum temperature reaches 40 deg; C, the relative humidity of the installation site should not exceed 50%; When the temperature is the lowest temperature -5 deg; c, the relative humidity is high, for example: the temperature is 25 deg; C and the relative humidity is 90%. Due to temperature changes, special measures must be taken to deal with occasional condensation on the surface of the product.