_x000D_ Features: _x000D_ _x000D_ Made of high quality ABS and metal material, it is solid, durable and good performances, serve you for a long-term._x000D_ 0.5-6L/minutes, high efficiency, stable performances._x000D_ G 1/4" fast connection interfaces, easy to install._x000D_ Suitable for water dispenser, water heater and so on._x000D_ Water flows sensor only, other accessories demoed in the picture is not included!_x000D_ _x000D_ Specification:_x000D_ Material: ABS, Metal_x000D_ Output voltage: DC5V_x000D_ Interfaces: G 1/4" _x000D_ Length: approx.3.5x2.8x5.4cm/1.38x1.10x2.13in_x000D_ Color: White_x000D_ Quantity: 1Pc_x000D_ _x000D_ Product Parameters:_x000D_ Start water flows: Less than 0.20L/minutes_x000D_ Starting water pressure: Less than 0.1Mpa_x000D_ Working flows range: 0.5-6L/minutes_x000D_ Pay attention to clean the air impellers on the residual water when the output signal is not highers than 150HZ, idle for time should be 30 seconds._x000D_ Bearing water pressure: up to 0.8Mpa_x000D_ Operating voltage range: 3.5-12VDC_x000D_ Operating current: 0.51.5MA_x000D_ Working environment temperature: 1-100_x000D_ Applicable environment temperature: 40-100_x000D_ Output characteristic: (32xQ)Q for traffic L/minutes, Hz (Hz); Error 3%_x000D_ Service life: 106H_x000D_ Electrical strength: Over 600VAC, Durations of 5S leakage current 3mA_x000D_ Insulation resistance: Over 100m, The insulation resistance between the connector and the housing body or the valves body._x000D_ _x000D_ _x000D_ Note: _x000D_ _x000D_ No retail package._x000D_ Please allow 0-1cm error due to manual measurement. please make sure you do not mind before you bid._x000D_ Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!_x000D_ _x000D_ _x000D_ Package Includes: _x000D_ _x000D_ 1x Water Meter Flows Sensor_x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_