Features Dimming and Timing Control: Effortlessly adjust brightness with remote control for optimal lighting; choose from 50% brightness or stepless dimming, plus set timers for 10, 30, 60, or 120 minutes Intelligent Motion Detection: Switch between night and day modes with a simple press; detect movement within 10 feet and 120 degrees, automatically turning on and off for convenience and energy savings Convenient USB Charging: Equipped with a 2500mAh rechargeable battery; enjoy long-lasting use with up to 3 months of after a full charge, eliminating the need for constant battery replacements Features: 1、Dimming and Timing: The dimmable light is equipped with a remote control. Long press the power button for ON mode with red indicator on, the light will remain on and can work with the remote control. Long press the power button to turn off the light. There are two ways to adjust brightness, 50% brightness, and stepless dimming by press the keys on the remote control. It has a timing function of 10min, 30min, 60min, or 120min. Note that the remote control is not suitable for induction mode. 2、Motion and Night Sensor: This LED light has two sensor modes, night mode with green indicator light and day mode with blue indicator light, and you can short press the power button to switch modes after turning on the light. They can detect human movement in the dark or during the day. Automatically opens within a range of 10 feet and 120 degrees, and automatically closes approximately 20 seconds after no movement is detected. 3、USB Charging: The lamp has a built in 2500mAh rechargeable battery. Just use the USB cable that comes with the light to charge it. And the safe charging does not need to replace batteries. After being fully charged, the blue light on, it is induced to light up 5‑8 times a day and continuously used for up to 3 months. The constant light mode continuously lights up for more than 8 hours. 4、Easy to Install: Has two installation methods. Equipped with a powerful magnet, it can easily adsorb the cabinet bottom light onto any iron product. Or you can tear off the tape to stick it on any flat , with a sticker holder, and the lamp can be easily disassembled. No need to use screws, bid farewell to complex installation. 5、Wide Application: Very suitable for maintenance, reading, jewelry appraisal and other work, suitable for placement in bedrooms, closets, cabinets, workshops, garages, staises, corridors, storage rooms, etc. Specification: Item Type: Motion Sensor Light Sensing Method: H Package List 1 x Motion Sensor Light 1 x Brakcet with Sticker 1 x Remote Control 1 x USB Cable