Video Color: Colorful Sensor: CCD Effective Pixels: 720*540 Resolution: 520TV lines Lens Angle: 170 degrees Working Power (DCV): 12V Operation Temperature: -20°C to +60°C, RH95% Max Storage Temperature: -30°C to +60°C, RH95% Max Current Consumption: No more than 300mA TV System: NTSC Night Vision Capability Waterproof Rating: IP67-68 Compatibility: Suitable for vehicles from 2000-2012 Condition: Waterproof function, durable construction Easy installation and simple operation High clarity output, high-definition with wide viewing angles Assists in safe driving and helps avoid vehicle accidents Installation Guide: 1. Remove the original license plate light at the rear of your vehicle 2. Mount the camera in the location where the original license plate light was installed 3. Connect the camera's built-in license plate light wiring to the original license plate light power connection 4. Connect the camera power wires: red wire to positive and black wire to negative, to the reverse light circuit 5. Connect the video cable from the camera to the extension cable 6. Connect the extension cable to your vehicle monitor 7. Video feed will display when the vehicle is shifted into reverse Color: Black Material: Plastic Camera Dimensions: 125*35*16.5mm Package Contents: 1 x CCD Car Rear View Camera 1 x Power Cable 1 x Extension Cable Note: The package includes only the items listed above; other accessories are not included. Note: Lighting and display differences may cause slight variations in the color of the item as shown. Measurement may vary by +/- 1-3cm.