Ⅰ. Item Type: Incubator Temperature and Humidity Sensor Set Ⅱ. Material: Plastic Ⅲ. Size: Approx. 160 x 80 x 95 mm / 6.3 x 3.1 x 3.7 inches Ⅳ. Sensor: A temperature sensor (2 meters long), A humidity sensor (2 meters long), approx. 2 m / 6.6 ft Ⅴ. Setting range: Humidity 10 - 80% RH, Temperature 1 - 65 ℃ Ⅵ. Display range: Humidity 0 - 99% RH, Temperature -9.9 - 99.9 ℃ Ⅶ. Measurement accuracy: Humidity 3% at 25 ℃, Temperature 1% at 25 ℃ Ⅷ. Control output: Seven-way (main heating, auxiliary heating, lighting, humidity control, right egg, left egg, fan) control, right egg, left egg Ⅸ. Output load: main heating ≤ 1500 W, auxiliary heating ≤ 1500 W, lighting ≤ 100 W, humidity control, right egg, left egg, fan ≤ 1 A/250 VAC Ⅹ. Incubation days: The maximum number of days that can be recorded is 99 days Ⅺ. Egg turning controller: Adjustable egg turning cycle 1 - 999 minutes Ⅻ. Egg turning time: 0 - 999 seconds adjustable XIII. Egg turning number: 0 - 999 times adjustable XIV. Ventilation control: Adjustable ventilation cycle 1 - 999 minutes XV. Ventilation time: 0 - 999 seconds Adjustable XVI. Lighting control: Adjustable lighting cycle 1 - 999 minutes XVII. Lighting time: 0 - 999 minutes adjustable XVIII. Working environment: -10 - 45℃, less than 90% relative humidity without condensation XIX. Weight: Approx. 529g/19oz XX. Package list: - 1x humidity sensor - 1x temperature sensor - 1 x controller host - 1 x user manual XXI. Package contents: This incubator controller kit includes 1 humidity sensor, 1 temperature sensor and 1 controller host. XXII. Temperature and humidity control: The incubator controller temperature and humidity sensor kit has temperature control, humidity control, and factory reset functions. XXIII. LED light indication, ejection timer control, alarm control, temperature and humidity calibration, incubation days setting, and function control parameters are included. XXIV. The incubator controller temperature and humidity sensor kit also has a lighting function, egg turning control, and switch operation. XXV. Wide voltage: The incubator controller temperature and humidity sensor kit uses a wide voltage of 100 - 240V and can be connected to any incubation equipment.