الوصف
M5 HUD Head Up Display OBD2 On-board Computer Windshield Projector Car Digital Display Speedometer Auto Accessories
WYOBD M5 Car HUD Head Up Display OBD2
Notice:
1.Car production year (before 2008 are incompatible with HUD) 2.If you are interested in our products, and the model is before 2008, or you don"'"t know whether your car can be used, you can enter the store and contact customer service.
The original car is not damaged, the smart is started to stop with the car HUD works: Receive the data from the car and display it on the machine.Car Speedometer
Displays Driving Datas On The Front Windshield when you are driving fastWater Temperature AlarmThe normal water temperature of a car engine while driving is 80C to 95C.Don"'"t let"'"s your car engine too hot.Light Sensor
Automatically adapt to the light sensitivity, and the brightness is changed by the environment.Products Details5 Alarm Functions
1.RPM alarm: alarm after the speed reaches the set default value of 7500 rpm.
2.Overspeed alarm: alarm when the vehicle speed reaches the set default value of 150KM/H.
3.Voltage alarm: alarm when voltage is lower than the default value of 10.0 volts.4.Fatigue driving: Reminder after continuous driving for more than 4.0 hours by default.
5.Water temperature alarm: when the water temperature is higher than the default value of 120 degrees.
Three Color Interface ModelHow to use itA: Short press
M
Switching voltage,Water temperature,Speed,
Enter the setting mode to switch the menu value and parameter value.
Long press
M
Vertical long Press in 5 seconds: enter into setting menu(menu 0-14),after finish adjustment,vertical long press in 3 seconds to save it and exitB: Short press
-
Decrease the menu or parameter value after entering the setting.
Long press-
Turn off the buzzer,press and hold again for 3seconds to turn on the buzzer.
C: Short press
+
Increase the menu or parameter value after entering the setting.
Long press+ The lights will be all on,and the fault code is eliminated,long press again to exit,all on.
D: Power switch:Long press to turn off,Long press again to turn on.
E: OBD port RPM=the rotational speed of the engine.
KM= Travel distance
= Water temperature in Celsius
M= Distance travelled miles
F= Fahrenheit
A= Accelerated speed measurement
COLOCK
MIN= Driving time
V =Battery Voltage
L/100KM= Fuel consumption Liter/100
kilometers
L/H =fuel consumption Liter/hour Lightsensor KM/H= Kilometers/hour, MPH= Miles/hourMultifunction displayAutomatic switch
Auutomatically turns on and off as the car starts and stops.
Simple Installation:
step 1Plug in OBD socket connector
step 2Insert the wire into the A-pillar sealing strip
step 3Connect OBD interface to HUDBuyer ShowsHUD installation1
. Ensure your vehicle is OBD|| compatible or EOBD.A. Check around the area under the steering wheel for an OBD plug.B. Contact your vehicle manufacturer or search online.C. Open the bonenet and look for a OBD|| compatible sticker(this is NOT on all OBD|| compatible cars,therefore isn"'"t deciding factor)
2
. Locate the 16 pin diagnostic link (see picture ).This is usually located in the area under the steering wheel.Detail steps:
1,put non-slip mat;2,put HUD on non-slip mat;3,connect OBD cable with car OBD2 interface;4,connect the other side of OBD2 cable with HUD ,and then start the engine;5,stick the reflection on windshield.
Product Accessories
1*packing box 1*reflective film 1*instruction
1*non-slip mat 1*OBD cable 1*product
-
هوية Fruugo:
200058133-425906706
-
EAN:
970907634342
معلومات سلامة المنتج
يرجى الاطلاع على معلومات سلامة المنتج الخاصة بهذا المنتج الموضحة أدناه
يتم توفير المعلومات التالية من قبل بائع التجزئة المستقل التابع لجهة خارجية الذي يبيع هذا المنتج.
ملصقات سلامة المنتج
تحذيرات السلامة:
important Safety Instructions Read Before Use: Please read all instructions and safety warnings before using this product. Failure to follow these guidelines may result in injury, damage, or malfunction. General Warnings Intended Use: Use this product only for its intended purpose as described in the user manual. Supervision Required: This product is not intended for use by children or persons with reduced physical, sensory, or mental capabilities without supervision. Inspection Before Use: Check for any signs of damage or wear before use. Do not use if damaged. Usage Precautions Environment: Do not use in wet, damp, or flammable environments unless specified as safe for such conditions. Proper Operation: Follow all operating instructions carefully. Avoid improper handling or misuse. Power Source: Use only the recommended power supply or batteries. Do not exceed specified voltage or current ratings. Maintenance and Care Cleaning: Disconnect from power before cleaning. Use only manufacturer-recommended cleaning methods and solutions. Storage: Store in a cool, dry place away from direct sunlight and extreme temperatures. Repairs: Do not attempt to disassemble or repair the product. Contact authorized service personnel for assistance. Specific Warnings Avoid Hazards: Keep the product away from sharp objects, water, and heat sources. In Case of Malfunction: If the product malfunctions or exhibits unusual behavior, discontinue use immediately and contact customer support. Disposal Instructions Recycling: Dispose of the product in accordance with local electronic waste disposal and recycling guidelines. Battery Disposal: Follow specific regulations for the safe disposal of batteries if included.
