The pneumatic brake bleeder enables simple, one man operation using a standard workshop (90 ~ 120psi). Quick clean and efficient operation without requiring specialised brake reseroir caps. Draws fluid from the brake nipple enabling brake bleeding or full replacement of fluid in the system. 100% new. Inlet air pressure: 6 -12bar(87 -174psi) Air consumption: 180ltr/min Thread connection: 1/4inch (female) Vacuum: 60% Safety Instructions: Keep this product in good working order and condition, take immediate action to repair damaged parts. Keep children and unauthorise persons away from the work area. Keep work area clean and tidy and free from unrelated materials. the work area has adequate lighting. DO NOT use the kit to perform a task for which it is not designed. DO NOT allow untrained persons to use the kit. DO NOT use whilst under the influence of , alcohol or intoxicating medication. After use, clean equipment and store in a cool, dry, childproof area. Always read and comply with the warnings on the brake fluid container. Wear eye protection and keep skin contact to a minimum. If brake fluid enters eyes rinse with plenty of water and advice. If swallowed advice immediately. WARNING: Brake fluid is - Keep away from sources of ignition, including hot surfaces e.g. exhaust manifold. Brake fluid damage paintwork. Any spillage should be flushed with water immediately. Colour:White Material:plastic Package Contents: 1 set of brake oil changing machine Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.