This cable is universal cable, it works for maxisys scanner also works for LAUNCH X431 or OBDSTAR scanners etc. For Programming Cable 12and8 Connector For Maxisys LAUNCH X431 Series The for 12and8 Adapter is 's by pass for 's Security Gateway Module () which limits an aftermarket scan tool to only reading DTCs and viewing data. 2018 and newer For , For , For Ram, For , and For now have a secure gateway module or . This will not allow your scan tool to do bidirectional controls on the vehicle. has provided a cable to bypass the . Suitable for: 1. The Cable Adapter can be used with Maxisys Series Scanners Such as MS906, MS906BT, MS906TS, MS908, MS908S, MS908S PRO, Maxisys Elite etc. 2. The Cable Adapter can be used with LAUNCH X431 Series Scanners Such as X431 V, X431 Vand, X431 PROS, X431 PRO3Sand, X431 PRO3Sand HDIII Model, X431 PAD V etc. For 12and8 Adapter needed on Vehicles with Secure Gateway Module: 2013and For RAM 2015and For 500x 2015and For RAM City 2016and For 2017and For 2017and For Compass 2017and For 2018and For Wrangler 2018and For Ram Trucks 2018and For Durango 2018and For Wrangler (JL Body only, not JK) 2018and For Journey 2018and For Grand 2018and For 2018and For 300 2018and For Charger 2018and For 2019and Most For or For or For or For Ram vehicles 2020and ALL vehicles Note: Installation guide not included, we strongly recommend you professional installation. Please check as much as possible to make sure the item is what you need. Colour:Red Material:Plastic Package Contents: 1 x For 12and8 Cable Adaptor Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is 1-3cm.