Quectel LC29HEA High Precision Centimeter Level RTK Module 10HZ Drone Flight Control Mobile Station GNSS Differential.

Multi-GNSS engine for GPS, for GLONASS, for BDS, for Galileo and for QZSS. Reception of L1 and L5 GNSS bands signals concurrently Integrated LNA for high sensitivity Integrated SAW filter for noise cancellation UART, I2C and SPI* interfaces Integrated AGNSS function. Integrated AIC and jamming function Overview LC29H is a series of dual-band,multi-constellation GNSS modules that support the concurrent reception of all four global GNSS constellations:GPS,BDS,Galileo and GLONASS. Compared to GNSS modules that track only L1 signals,the LC29H series can receive and track a higher number of visible satellites in multi bands,thereby significantly mitigating the multipath effect in deep urban canyons and improving positioning accuracy.By having an internal LNA and SAW filter,the module achieves better sensitivity and anti-interference capability.Featuring dual frequency support,the module delivers CEP accuracy values of 1 m in autonomous mode and centimeter levels in the RTK capable variants.The optional DR function ensures the module's superior positioning performance even in weak signal areas or when GNSS signals are not available. Based on the receiver chip using 12 nm technology, the LC29H series provides advanced power management enabling low-power GNSS sensing and position fix, which makes the module an ideal solution for power-sensitive and battery-powered systems. Featuring high-precision positioning and low power consumption makes the LC29H series suited for applications such as real time tracking and sharing economy related services. Color:As Shown Material:PC+Metal Package Contents: 1 * module 1 * antenna 1 * data cable(The cable color and style are random, and the designation is not accepted.) Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.