RC MARK5 5inch FPV Carbon Fiber Frame 225mm Wheelbase with 5mm Arm for FPV Freestyle Vista Analog Drones Rack parameters Material: 3K carbon fiber Rack Type: H Type Flight control: RF/KISS/F3/F4/F7 Wheelbase: 225MM Motor: 2204/05/06/07/2305/2306/2307 Propeller: 5 inches ESC: 20-50A Size: 168MM*216MM Battery: 3-6S 1500-2200MAH Weight: (173g with print) Weight: (217g with print and carton) Bottom plate thickness: 2.5MM Top plate thickness: 2.5MM Arm thickness: 5MM |Camera installation distance: 20MM Picture transmission installation hole distance: compatible with 30.5MM/20MM Flight control installation hole distance: compatible with 30.5MM Features: 7075 aluminum alloy side plate, new visual effect, durable, effectively protect PFV lens. Wide X-arm design, stable and flexible flight attitude. The video transmission installation holes are compatible with the sky terminal, vista and analog video transmission. Compatible with lenses with a width of 19-20mm, you can directly install the original DJI lens. Unique frame shock absorption design, less vibration, safe and stable electronic system operating environment. Independent capacitor and buzzer compartment, the whole machine runs extremely stable, no jitter, no shaking. Compatible motor hole position, supports the installation of 16*16mm and 19*19mm motors. Two kinds of 3D printing bases are designed, which can be installed with Gopro cameras, as well as Naked Dog 8, insta 360 G02 and Caddx Peanut cameras, and the shooting effect is stable and clear. The frame is optimized for 5-inch propellers for a smoother free-flying experience. Recommended configuration: ( Not included) Flight control: RF/KISS/F3/F4/F7 Motor: 2204/05/06/07/2305/2306/2307 ESC: 20-50A Battery: 3-6S 1500-2200MAH _x000D_