Item Type: Wind Pressure Transmitter Material: Aluminum alloy Measuring Medium: Non-corrosive gas Overload Capacity: Single-ended minimum withstand voltage 4Kpa, maximum withstand voltage can not exceed 25 times the range Measurement Accuracy: 0.2%FS Output Signal: 4~20mA Power Supply: DC24V Wire Length: Approx. 50cm / 19.7in Pagoda Mouth Diameter: Approx. 8mm / 0.3in Temperature Drift: 0.1%FS/ Ambient Temperature: -30~+80 Environmental Humidity: 85%RH Applicable Environment: Widely used in pressure measurement in clean rooms, boilers, dust collectors, vacuum cleaners, power plants, air conditioners, etc. Size: Approx. 60mm / 2.4in 51mm / 2in 45mm / 1.8in 20mm / 0.8in 64mm / 2.5in 4mm / 0.2in 40mm / 1.6in 35mm / 1.4in 30mm / 1.2in 10mm / 0.4in 1.5mm / 0.1in 1This product has high sensitivity and high accuracy, and strong anti-overload ability. 2Strong anti?interference ability, highly integrated sensor and amplifier circuit, long?term stable and reliable. 3Made of die?cast aluminum alloy, the 0 point and accuracy of the circuit board do not need to be adjusted. 4Using unique stress isolation technology, after precise temperature compensation and high stability amplification processing, the signal of the measured medium is converted into a 4-20mA output signal. 5With strict quality control and quality assurance, high safety factor, can be used with peace of mind.1 x Wind Pressure Transmitter