Single Phase Full Isolation Voltage Regulator Resistance Regulating Module Multi Signal Input Control AC220V 40A

Feature:1. FULL ISOLATION: The terminal and the main electrical circuit are fully isolated, and the control input voltage is greater than the dielectric 2000Vac.2. EXCELLENT PARTS: Using high power thyristor chip and DCB ceramic base plate, the single phase voltage regulator has stable performance and high reliability.3. INPUT MODES: Supports 4‑20mA, 0‑5Vdc, 0‑10Vdc, 5Vdc and other input control modes, and can also be manually adjusted through the potentiometer.4. GOOD PERFORMANCE: Wide input range, high output regulation accuracy, built in SCR protection circuit, low harmonic interference, with linear compensation function.5. LED INDICATOR: The voltage regulator module has LED indicator, green indicating power indicator light, red indicating output regulation indicator light.6. CIRCUIT PROTECTION: Additional maximum output limit, adjustment function and slow start adjustment effectively protect voltage safety and prolong service life.Specification:Item Type: Single Phase Voltage RegulatorProduct Material: Metal, PBT, DCB CeramicInput Current: 0-5V, 0-10V, 4-20mA multi signalOutput Load Voltage: AC 220VPeak Voltage: 600V ACControl Type: Smart Stepless RegulationAmbient Temperature: -20-70℃The coefficient depends on the load type of the equipment you want to carry: resistive load: 60%, inductive load: 30%Application:Heating: Electric furnace, injection molding equipment, thermoforming, textile equipment, infrared heating, drying systemMotor: Soft start of fan motor, water pump motor and ordinary motorLighting: Public lighting, industrial lighting, stage lightingOthers: Transformer, inductance coil, electric welding, electroplating.Package List:1 x Single Phase Voltage RegulatorNote:The radiator is used for auxiliary heat dissipation. The solid state relay with a working current of more than 10A must be equipped with a radiator. The relay and radiator quality inspection must be supplemented with thermal conductive silicone grease for better heat dissipation. When the temperature of the radiator surface is close to 60C, forced air cooling should be used. When the temperature is above 80A, forced air cooling or water cooling must be strengthened.