Compatibility: Replacement strip compatible with Festool 495209 and 495207 splinter guards. Fits Festool FS/2, FS/2 KP, FSK guide rails, and Festool rail saws. Regular replacement helps maintain splinter-free cuts, especially when switching materials or using the guide rail with multiple saws. Function: Replace the splinter guard as needed to ensure precise alignment of the guide rail with the cutting line and prevent tear-out during parallel and lateral cuts. The new splinter guard aligns accurately with the saw blade, enhances visibility of the cutting line, and reduces setup time. High Quality: Made from high-quality soft rubber with strong adhesive backing for high clarity and excellent adhesion. Stays securely attached to the guide rail without peeling off easily. Easy to Replace: The splinter guard is cut upon first use, matching the exact cutting edge for precise placement at the scribe mark. Simply remove the protective tape before application. Note: Clean the guide rail thoroughly with acetone and ensure the surface is free of grease and residue before installing the new splinter guard. Installation Tips: - Work on a clean surface to avoid dust or debris adhering to the adhesive. - Peel off the adhesive liner carefully to prevent trapping debris. - Use a scraper and acetone to remove any leftover adhesive before applying a new strip. - When reapplying, slightly offset the guard to allow for clean cutting performance. Color: As shown in photo Material: Plastic Package Contents: 1 x Splinter Guard Replacement Strip Note: - Allow 1–3 mm size variation due to manual measurement and 1–3 g weight variation. - Actual color may vary slightly due to lighting conditions and monitor display differences.