This portable mini flocking machine is easy to operate. The circuit inside the handle features low power dissipation and high voltage output, providing strong flocking performance. Ideal for applying grass flocking to construction models, planting models, and landscape models. Requires 2 x 1.5V AA batteries (not included). Designed for extended working life with a rechargeable battery option.Style: 3000V Rated working voltage: DC + 3V Rated working current: 50mA Rated output voltage: DC 3000V Rated operating power: 0.15W Battery requirement: 2 x 1.5V AA batteries (not included)Note: Keep away from children to prevent electric shock. Adult use only, and proper safety precautions must be followed. Refer to the instruction manual for detailed safety warnings and operating procedures.Flocking Steps: 1. Pour half a bottle of grass flocking into the container. 2. Hang the high-voltage wire over the bottle mouth so it contacts the wire netting, creating an energized state. 3. Apply glue to the surface where flocking is desired. 4. Insert the ground wire near the flocking area. 5. Slide the power switch to the on position. 6. Press and hold the operation button while moving the unit up and down. 7. Flocking particles will fall vertically due to static charge. 8. Flocking will evenly adhere to the glued surface.Size: Approximately 24.5cm Material: Plastic Color: Black Package Contents: 1 x Flocking Machine 1 x Brush 1 x Wire Net 4 x Grass Powder (30g per bag) Note: Colors may vary slightly due to monitor display settings. Measurement tolerance: +/- 1-3cm.