STM32F4 Development Board, MicroPython Programming Learning Kit, STM32F411CEU6, Dual Crystal Oscillator, HID Bootloader, 3 Buttons, Type-C, Black

٤٤٩٫٠٠ E£
+ ١٬٣٤٥٫٤٩ E£ الشحن

STM32F4 Development Board, MicroPython Programming Learning Kit, STM32F411CEU6, Dual Crystal Oscillator, HID Bootloader, 3 Buttons, Type-C, Black

البائع:

٤٤٩٫٠٠ E£

وفّر ٧٠٠٫٠٠ E£ (60%)

السعر الأصلي

١٬١٤٩٫٠٠ E£
في المخزون
+ ١٬٣٤٥٫٤٩ E£ الشحن

سياسة الإرجاع لمدة 14 يوما

طرق الدفع:

  • العلامة التجارية: Unbranded

تفاصيل المنتج

تفاصيل المنتج

STM32F4 Development Board, MicroPython Programming Learning Kit, STM32F411CEU6, Dual Crystal Oscillator, HID Bootloader, 3 Buttons, Type-C, Black

STM32F4 Development Board – MicroPython Programming Learning Kit with STM32F411CEU6 This STM32F4 development board is designed for learning and prototyping, offering support for MicroPython programming. It features dual crystal oscillators: a 25MHz high-speed crystal and a 32.768KHz 6PF low-speed crystal. The V3.0 version uses a lead-free process and gold-plated pin headers for a more eco-friendly design. Reserved flash pads allow for expansion, and USBDisk & FATFS routines are provided. The board comes pre-flashed with the WeAct HID FW Bootloader (factory test version, hex not provided). MicroPython firmware is available for programming; refer to the configuration files via the link, but technical support is not included. Boards from V1.3 and above include three buttons: reset, BOOT0, and a user button. How to enter ISP mode: Method 1: With power on, press and hold both BOOT0 and reset, release reset, then release BOOT0 after 0.5 seconds. Method 2: With power off, hold BOOT0, power on, and release BOOT0 after 0.5 seconds. DFU mode: Simply connect to a computer with a data cable. If not recognized, gently warm the chip (to about 25°C) and re-enter ISP mode. Serial mode: Use a USB-to-serial adapter to connect to PA9 and PA10 on the core board. With the WeAct HID FW Bootloader, no USB-to-serial adapter, debugger, or computer driver is needed—just a Type-C data cable to complete firmware download. Press and hold the KEY
  • هوية Fruugo: 548723506-1107271163
  • EAN: 5298106713039
السلامة

معلومات سلامة المنتج

يرجى الاطلاع على معلومات سلامة المنتج الخاصة بهذا المنتج الموضحة أدناه

يتم توفير المعلومات التالية من قبل بائع التجزئة المستقل التابع لجهة خارجية الذي يبيع هذا المنتج.

ملصقات سلامة المنتج

CE Mark
تحذيرات السلامة: Do not let your children touch this product alone to avoid swallowing or other injuries

تفاصيل امتثال المنت

يرجى الاطلاع على معلومات الامتثال الخاصة بهذا المنتج الموضحة أدناه.

يتم توفير المعلومات التالية من قبل بائع التجزئة المستقل التابع لجهة خارجية الذي يبيع هذا المنتج.

الجهة المصنعة:
توضح المعلومات التالية تفاصيل الاتصال الخاصة بالجهة المصنعة للمنتج ذي الصلة والذي يُباع على Fruugo.

  • Wuxishijunchuangdianzikejiyouxiangongsi
  • Wuxishijunchuangdianzikejiyouxiangongsi
  • dongtingjiedao,zijinglu1-14, xishanqu
  • Wuxi
  • CN
  • 214000
  • [email protected]
  • 15716205335

الشخص المسؤول في الاتحاد الأوروبي:
توضح المعلومات التالية معلومات الاتصال الخاصة بالشخص المسؤول في الاتحاد الأوروبي. الشخص المسؤول هو المُشغل الاقتصادي المُعيّن والكائن في الاتحاد الأوروبي والمسؤول عن التزامات الامتثال المتعلقة بالمنتج ذي الصلة الذي يُباع داخل الاتحاد الأوروبي.

التوصيل

توصيل

يُرسل خلال ٢ أيام

  • STANDARD: ١٬٣٤٥٫٤٩ E£ - التسليم بين الاثنين 30 نوفمبر 2026 – الاثنين 07 ديسمبر 2026

يُشحن من الصين.

الإرجاع

الإرجاع

نحن نبذل قصارى جهدنا لضمان أن تصلك المنتجات التي تطلبها بالكامل وطبقاً المواصفات التي حددتها. إلا أنه في حال تلقيك طلب غير كامل أو أغراض تختلف عن تلك التي طلبتها أو كان هناك سبب آخر يدعوك لعدم الرضاء عن الطلب، فيمكنك رد الطلب أو أي منتجات يتضمنها الطلب واسترداد ما دفعته من أجل تلك الأغراض بالكامل.

عرض سياسة الرد الكاملة