Communication distance: 600 mworking band: 2.400-2.4835GHz, ISM, 126 bandsmodulation mode: GFSKMaximum transmit power:23dBmReceiving sensitivity: -94dBmPower consumption: 5WCommunication distance: 600 mworking band: 2.400-2.4835GHz, ISM, 126 bandsmodulation mode: GFSKMaximum transmit power:23dBmBattery capacity: 750 mACharging time: 3 hoursUse time: 20 hoursReceiving sensitivity: -94dBmfor DMX signal interface: RS485Reliability: Auto restart timer: Built-in WDTOperating temperature: -40 ~ 85 ° C, 5 ~ 95% RH humiditystorage temperature: -65 ~ 150 ° C, 5 ~ 95% RH humidityControl mode: controlled by DMX512 console. The transmitter is plugged intofor the dmx console, the receiver is plugged into the fixtureService life: 10 yearsOperating Instructions:1. Receiver: Press and hold the touch switch, wait for it to turn on, then pressand hold the touch switch again to turn off. Transmitter: It will automatically turn on after being powered on. Touch switchescan be used for power on and off.2. The device can be divided into 20 groups of IDs, with the same number set foreach group of transmitters and receivers. 20 transmitters can be usedsimultaneously.3.When the transmitter and receiver are connected to the signal, the signalindication will flash. (If there is no flashing, the transmitter and receiver are notconnected successfully)Plug Type:EU Plug,it applies to Indonesia, Germany, France, Spain, Italy and so on.Voltage: AC220VColor: As ShownMaterial: ABSPackage Contents:1 transmitter3 receiversOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.