Time control board for spot welding machine with 100 A digital dual-pulse LCD encoderWHBYV

١٬٤٤٩٫٠٠ E£
+ ٩١٩٫٤٩ E£ الشحن

Time control board for spot welding machine with 100 A digital dual-pulse LCD encoderWHBYV

البائع:

١٬٤٤٩٫٠٠ E£

وفّر ١٬٢٠٠٫٠٠ E£ (45%)

السعر الأصلي

٢٬٦٤٩٫٠٠ E£
في المخزون
+ ٩١٩٫٤٩ E£ الشحن

سياسة الإرجاع لمدة 14 يوما

طرق الدفع:

  • العلامة التجارية: Unbranded

تفاصيل المنتج

تفاصيل المنتج

Time control board for spot welding machine with 100 A digital dual-pulse LCD encoderWHBYV

III. Usage method:Voltage calibration:The module has the network voltage compensation function, so the voltage calibration must be carried out when the first machine is installed, and in the future, as long as the module power transcompatiblemer is not replaced, there is no need to recalibrate. Of course, when you feel that the display voltage is wrong and it can be calibrated. The following are the mains voltages that are not calibrated and displayed during operation Pay attention to the safe use of the high voltage part during installation. When the usage frequency and power are high, silicon control rectifier requires external radiator to disspate heat.The power of the module driving load depends on the power of silicon control rectifier (SCR). BAT41 (40A) can carry a microwave oven transcompatiblemer, BAT100 (100A) can carry two microwave oven transcompatiblemers, and the recommended one compatible Loop transcompatiblemer is 100A. Precautions compatible use:This module DIY needs to have certain electrician knowledge, if you are complete freshman, please refer to the electrician's knowledge becompatiblee you start. Do not know the welding time and power of the welded parts, it is recommended that the welding time and power be adjusted from small to upper to avoid damage to the welding pen.Fault cause and troubleshooting,The electricity supply does not match the actual electricity voltage: re-voltage calibration. The solder joint is not secure or soldered: adjust welding time and power until satisfactory results are achieved.Can be set to save the last operation, the module double pulse trigger, turn off any set of trigger time, you can change double pulse to single pulse trigger.The main board and the display operation panel are separated, and the outer casing can be flexibly assembled. With grid voltage compensation, the output of compensation can be automatically adjusted according to the change of power supply, and the electric voltage of about 1 second can be displayed when triggered, so that the effectivePlease pay attention to the size and model when purchasing.
  • هوية Fruugo: 533939338-1082179473
  • EAN: 6900753461254
السلامة

معلومات سلامة المنتج

يرجى الاطلاع على معلومات سلامة المنتج الخاصة بهذا المنتج الموضحة أدناه

يتم توفير المعلومات التالية من قبل بائع التجزئة المستقل التابع لجهة خارجية الذي يبيع هذا المنتج.

ملصقات سلامة المنتج

CE Mark
تحذيرات السلامة: Not suitable for children under 128 months. Choking Hazard. Adult supervision recommended. External use
مكونات: Other

تفاصيل امتثال المنت

يرجى الاطلاع على معلومات الامتثال الخاصة بهذا المنتج الموضحة أدناه.

يتم توفير المعلومات التالية من قبل بائع التجزئة المستقل التابع لجهة خارجية الذي يبيع هذا المنتج.

الجهة المصنعة:
توضح المعلومات التالية تفاصيل الاتصال الخاصة بالجهة المصنعة للمنتج ذي الصلة والذي يُباع على Fruugo.

  • Wanze Huanbao Baozhuang (Shenzhen) Youxian Gongsi
  • Wanze Huanbao Baozhuang (Shenzhen) Youxian Gongsi
  • Room 1505, Unit B, Building 18, Phase 3, Slow City, No. 5 Jingfen Road, Longgang District,
  • Guangdong Province
  • Shenzhen
  • CN
  • 518118
  • [email protected]
  • 13530808530

الشخص المسؤول في الاتحاد الأوروبي:
توضح المعلومات التالية معلومات الاتصال الخاصة بالشخص المسؤول في الاتحاد الأوروبي. الشخص المسؤول هو المُشغل الاقتصادي المُعيّن والكائن في الاتحاد الأوروبي والمسؤول عن التزامات الامتثال المتعلقة بالمنتج ذي الصلة الذي يُباع داخل الاتحاد الأوروبي.

  • Jorge Wilson
  • GAVIMOSA CONSULTORIA, SOCIEDAD LIMITADA
  • CASTELLANA 9144, 28046 Madrid
  • Madrid
  • ES
  • 28046
  • [email protected]
  • 34696313170
التوصيل

توصيل

يُرسل خلال ٣ أيام

  • STANDARD: ٩١٩٫٤٩ E£ - التسليم بين الاثنين 07 ديسمبر 2026 – الجمعة 18 ديسمبر 2026

يُشحن من الصين.

الإرجاع

الإرجاع

نحن نبذل قصارى جهدنا لضمان أن تصلك المنتجات التي تطلبها بالكامل وطبقاً المواصفات التي حددتها. إلا أنه في حال تلقيك طلب غير كامل أو أغراض تختلف عن تلك التي طلبتها أو كان هناك سبب آخر يدعوك لعدم الرضاء عن الطلب، فيمكنك رد الطلب أو أي منتجات يتضمنها الطلب واسترداد ما دفعته من أجل تلك الأغراض بالكامل.

عرض سياسة الرد الكاملة