2 Set Electronic Accessories: 1 set x Camera module & 1 x Breakout board for Raspberry Pi camera module kit,compatible with Raspberry Pi model B/B+/A+/4/3/2/1(Not compatible with Raspberry Pi Zero). 3MP Lens with 5 megapixel OV5647 sensor, for better and clearer image! Embedded removable IR-CUT filter,avoid color distortion in the daylight. Comes with infrared LED, has a better night vision. Color: Black + White + Blue+red Material: PCB + ABS+PC + metal Breakout board: connectors are the audio-style connectors that you see on some phones, MP3 players and development boards. stands for "Tip, Ring, Ring, Sleeve," which reflects the fact that, unlike a standard stereo connector, this actually has three conductors and a ground. Some devices use the extra conductor for a microphone (like hands-free headsets) or to carry a video signal (like in some MP3/MP4 players). This breakout board makes it easy to add a jack to your prototype or project by breaking out each conductor to a standard 0.1inch spaced header. Camera module: Add heat sinks to the back of the IR LEDs or loosen the screw when not in use for better heat dissipation performance. CCD size: 1/4 inch Aperture(F): 1.8 Focal Length: 3.6 mm (adjustable) Field of View: 75.7 degrees Preferred Sensor Resolution: 1080p Dimension: 31mm x 32mm 4 screw holes which are used for a fixed position. Support 3.3V power output. Supports connecting infrared LED or flash LED. Package Contents: 1 x Camera module 2 x Infrared LED Board 1 x 15cm FFC cable 1 x Breakout board Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.