Ublox 6m Gps W/box & Compass Special For Pix Pixhawk Px4 Autopilot ControllerThe product is shipped based on the color or size of the main image of the product page.Description:uBlox 6M GPS W/box & Compass special for PIX Pixhawk PX4 Autopilot ControllerNEO-6M Ublox/u-blox GPS Module for MWC/APMThese are Pre-configured, Flashed with the correct settings, and tested. To make them Plug and Play. Super Bright LEDBlackPlane with Standard Mk style mounting holes 45mm X 45mmBlox Neo 6M Chipset 38400 bps (Default) Changed to 115200bpsOutput GGA, GSA and RMC frames1Hz (Default) Changed to 5HzPermanent Configuration RetentionCable includedMoved LED to the TopBigger battery compass on board6 pin connector for EZ connect to MEGA BLACK4 pin connector for onlyGPS use4 pin connecton for compass only use GPS "PCB HOOD" for More EMI/RFI Shieldingcan use both 4 pin at once The GPS unit is per-configured for multiwiiUnlike other shops send it out default settings, and yet you figure it out. pre tested = PLUG AND PLUG for MW or APM/ardupilotMultiWii GPS assited Position Hold and RTH functions NEO-6M Ublox u-blox GPS Module with on-board compass HMC5883l (compass) (mag)Specification:Main chip:U-BLOX NEO-6MC/A code,1.023MHzReceiver Frequency:L1 [1575.42MHz]Locate performance2D :3m(Average)2D:2m(average),with WAAS drifting?0.02m/saccuracy:1uscoordinate system:WGS-84max attitude height:18000Max speed:515m/saccerlaration:?4gtracking sensitivity:-161dBmCapture sensitivity:-148dBmcold start time:38s averageWarm start time:35s averagehot start time:1s averageCapture time:0.1s AverageTemperature:40?to +80?wide power supply voltage:+3.5V~+5.5VUblox GPS Module V2.0it come without the PIX controllerPackage Includes: 1*uBlox 6M GPS W/box