UP Step Down Automatic Feeding Module

Modular Power Supply -UP Step Down Auto Power Module Highlights Generic Brand UP Step Down Auto Power Module Description: Wide input voltage range: DC 5~32V. Output voltage: DC 2~24V (continuously adjustable). Continuous output current: 12A, maximum 14A (14V input, 12V output); Operating frequency: 200KHz. Use advanced synchronous rectification technology, conversion efficiency up to 98%. Has output overcurrent and short circuit protection; Input with 15A fuse, safer to use. Chip with overheat protection, automatically stop working when overheated. Input under-voltage protection, stop working when the input voltage is lower than 4.5V. Has no input reverse connection protection, if the input and output are reversed, the module will be burned. Soft start function, to ensure that no overshoot voltage exists when power on. The enabled terminal can directly control the switch of the output voltage, connect the ground to close the output voltage, the module will enter standby mode. No connection opens the output. Input and output both use LC filter, large capacity ceramic capacitors and high frequency low impedance electrolytic capacitors to ensure very low input and output ripple. When input is 14V, output is 12V 10A, ripple 30mVp-p. Especially in automotive application conditions, it does not interfere with other devices. Full load temperature rise: 50, with heat sink to improve heat dissipation. Working Temperature Range: -45~+85 Specification: Size: Approx. 85 x 48 x 25 mm Package includes: 1 piece LTC3780 Auto Raise/Lower Module