USB-Enabled Air Conditioner Module: Automatic Start Upon Power Restoration and Automatic Restart Upon Power Failure

Air Conditioner Start-up Mode: Cooling, 24 degrees (not adjustable) Cyclic Sending: The controller automatically sends a start-up command every 30 minutes to ensure the air conditioner is always on. Setting Cyclic Sending: Press and hold the "Send" button. If the red indicator light flashes twice, it's cyclic sending; if it flashes once, it's not cyclic sending. Installation Test: Turn off the air conditioner, then briefly press the send button. If the air conditioner turns on, the installation location is suitable; if it fails, the installation location needs to be readjusted. Simulated Power Off Test: Turn off both the air conditioner and the controller. Wait a moment, then turn the power back on. The controller will automatically send a start-up command approximately 1 minute after power is restored. If the test is normal, it is ready for use. Product Parameters: Power Supply Voltage: DC-5V; Standby Power Consumption: <0.1W; Remote Control Distance: 5-10M; Infrared Tubes: 6; Net Weight: 15g; Appearance: USB type; Product Dimensions: 24 (L) * 15 (W) * 67 (H) cm Applicable Air Conditioner Brands: for Gree, for Midea, for Haier, for Chigo, for AUX. Product Parameters: Power Supply Voltage: DC-5V; Standby Power Consumption: <0.1W; Remote Control Distance: 5-10M; Infrared Tubes: 6; Net Weight: 15g; Appearance: USB type; Product Dimensions: 24 (L) * 15 (W) * 67 (H) cm. (The green and black plates inside the shell are sent randomly.) Color: Transparent Color Material: plastic Package Contents: 1*Air Conditioner Start Module Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.