PICkit3 is a development tool designed by Microchip for beginners to learn, evaluate and develop PIC series MCUs that integrates online simulation and download. PIC series microcontrollers are connected to PICkit3 through ICSP interface. Directly support Microchip official IDE (integrated development environment software) MPLAB-. Support most PIC series microcontrollers with ICSP interface. Programming function: FLASH ROM, EEPROM, etc. can be programmed. Simulation function: Supports various debugging methods such as full-speed operation, single-step debugging, and breakpoint debugging. Simulation performance: use USB interface for simulation debugging, single-step debugging, breakpoint debugging, and fast response Programming performance: using USB interface, ICSP download, fast download speed Package Includes: 1 Set Microcontroller Specifications: Material:Plastic 8-bit Devices - PIC10F/12F/16F PIC10F/12F/16F5X PIC16F6xx PIC16F7XX PIC16F8XX PIC16F9XX PIC16F1XXX 8-bit Devices - PIC18F PIC18CXX/FXX PIC18F1XXX PIC18F2XXX/4XXX/6XXX/8XXX PIC18FXXJ PIC18FXXK 16-bit Devices dsPIC30F/33F, PIC24F/H 32-bit Devices PIC32MX Style: burner/without burner 1. The PICkit 3 programmer/debugger is a simple, low-cost in-circuit debugger controlled by a PC running MPLAB- IDE (v8.20 or later) software on a Windows platform. 2. PICkit3 can perform online programming and debugging of almost all series of PIC FLASH microcontroller chips such as Microchip's PIC10/12/16/18/24/32, dsPIC30/dsPIC33. And PICkit3 can program Microchip's KEELOQ- HCS series chips, MCP250xx CAN series chips, and EEPROM memory chips. 3. Compared with PICkit2, PICkit3 has the advantages of stable simulation, more supported models and faster, and can stably support PIC16 PIC18 PIC24 DSPIC- series MCU simulation and download. note: 1.Please allow 1-2cm errors due to manual measurement, make sure that you do not mind before you order. 2.Due to the difference between different monitors, the picture may not reflect the actual color of the item.