WS2812B Controller Bluetooth Music APP Control for Pixel LED Strip Light SK6812 WS2811 WS2812 Tape Lights USB 5V Remote Control WS2812B Controller Bluetooth Music APP Control for Pixel LED Strip Light SK6812 WS2811 WS2812 Tape Lights USB 5V Remote Control Product Parameter Rated voltage: USB-5V, DC-12~24V Rated Power: 144W Controllable points: max 2048 points Support IC: 2812, 2811, 16703, 16704, 1903, 6812, 1003, 2904, etc. Remote control battery: 1* CR (not included) Connection method: USB / DC Control method: mobile phone APP remote control Control range: 40m(open area) Product Feature 1. Can use the app to control and adjust the color and brightness of the light strip through the smart bluetooth 2. Built-in 100 kinds of jump mode, DIY mode, rainbow running water mode, meteor mode, turn on/off curtain mode, music mode 3. Timing delay switch, the number of segments set at will 4. Can be equipped with wireless 2.4G remote control, the distance is farther and more stable 5. The color and dynamic effect of each point can be set freely, the color can be selected as color block gradient or mixed gradient 6. The visible distance is up to 40m, the signal is stable, the power consumption is low, and it is easy to use Package Include 1* LED Strip Light Controller (Remote not including CR battery) Setting of RF remote (if include) Open the ZENGGE app Long press the device name Device information 2.4G remote control setting How to set the IC model and IC numbers Long press the device and click on "Change LED Strip Type" to set the IC model, Wiring and Sorting, Number of points, Number of segment(Total number of points can not exceed 300 in each segment and total LED chip's quantity can not exceed 2048). On music mode, the total number of points in each segment and the total number of segment should be less than 150 points and 64 segments, the total LED Chip's quantity should be less than 960. _x000D_