_x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ Instructions : Set start the humidity: Press the UP button display start the humidity , long press about 3s the start the humidity flashing , then press the UP or Down adjust the set Set to stop the humidity: Press the Down button display Stop the humidity , long press about 3s the Stop the humidity flashing , then press the UP or Down adjust the set Restore the factory Settings: press the UP and Down button at the same time , will display 888 then will Automatically detect the humidity. Moisture range:00%~99%RH Humidity control precision:0.1% RH Measuring Accuracy: +/- 2%RH Load Power: 110V~220V MAX Output: 10A output type:Direct output Length of cable: 87cm Plug Type:EU Plug,it applies to Indonesia, Germany, France, Spain, Italy and so on Material: ABS colour: As shown Package Contents: 1 x XK-W2008 Digital display humidity controller Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_